Drills and Drill Bits
Grainger Cor Rad End Mill 1/4 Carb 0.0200 rad
The Grainger 14T032 is a Dayton 1/3 HP 115/230V Dual Voltage ODP Motor. It is a general purpose motor with a 1/3 horsepower rating and operates on either 115 or 230 volt power. The motor has a dual voltage capability, open drip proof enclosure, and features sleeve bearings. It can be used for a variety of light industrial, commercial, or residential applications requiring 1/3 HP. The motor dimensions are length 7-1/2", width 5-3/4", height 6-5/8" and it weighs 15 pounds. This versatile 1/3 HP dual voltage ODP motor from Dayton would be a good choice for many light duty drive applications.
Grainger End Mill Kyocera MEW 1250W100104T 1.25
The Kyocera 170HJ5 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a 1/2" shank diameter and features TiAlN coating for increased hardness and heat resistance. This end mill is designed for general purpose milling in a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastics and other non-ferrous metals. It has a helix angle of 30° and is capable of operating at speeds up to 325 SFM. The 170HJ5 end mill is made in Japan by Kyocera and sold individually.
Grainger Router Bit Set 4 Pc Carbide Tipped
The DeWalt DW6913 router bit set contains 15 high speed steel router bits in 1/4", 3/8", and 1/2" shank sizes. The set includes straight, roundover, cove, V-groove, chamfer, dovetail, and Roman Ogee bits as well as a T-slot cutter, flush trim bit, and two edge guide bits. The 1/4" shank bits can be used in laminate trimmers and compact routers while the larger shank sizes fit full size routers. All bits feature precision ground carbide tips for clean cuts in wood, plastic, and soft metals. The bits come packed in a molded case.
Grainger End Mill Kyocera MEW 0625S6256102T 0.6
The Kyocera 170HK3 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, contouring, and face milling in both ferrous and non-ferrous metals. The end mill features a center cutting design for plunge cuts and slotting.
Grainger Sq. End Mill Single End Carb 5/32
The Grainger Sq End Mill Single End Carbide 5/32" is a square end milling cutter made from solid carbide with a 5/32" cutting diameter. It has a 1/4" shank diameter and is uncoated with an overall length of 2-1/2". This single end mill is designed for slotting, side milling and contour milling in steel, cast iron, aluminum and other non-ferrous metals. It provides good chip flow in milling applications. The carbide construction gives a long tool life with faster speeds and feeds compared to high speed steel.
Grainger Threading Tool 1/8 Carbide
The Grainger 16T143 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a 1.15 service factor, thermally protected, manual reset overload protector, and meets NEMA design B standards. This motor can be used for various industrial applications requiring 3/4 HP.
Grainger End Mill Kyocera MEC 16S1211T 16mm
The Kyocera 170HL6 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and is center cutting for plunge cuts. It is designed for slotting, profiling, and contouring in steels, cast iron, aluminum, and other non-ferrous metals at speeds up to 325 SFM. The end mill has a tolerance of +/- .0005" and comes with a 30 day warranty from the manufacturer.
Grainger Threading Tool 5/16 Carbide
The Micro 100 Threading Tool is a 5/16" shank threading tool with a 60 degree threading insert. It has a 0.625" max depth of thread and can cut unified screw threads from 4-56 to 1"-8. The tool body is made from C2 carbide and uses TPG432 inserts. It has a TiN coating for increased tool life. The threading tool has a 5/16" square shank and is 5.5 inches overall. It is designed for general purpose threading applications.
MSC Hertel HCH70012K 5 Pc #1 to #5 High Speed Steel Combo Drill & Countersink Set 60° Included Angle, Plain Edge
Hertel HCH70012K 5 Pc #1 to #5 High Speed Steel Combo Drill & Countersink Set 60° Included Angle, Plain Edge
Grainger Sq. End Mill Single End Carb 1/8
The 14M375 is a 3M Scotch-Brite General Purpose Hand Pad, 6" x 9", Maroon from Grainger. It features an open, nonwoven nylon web construction that is durable and conformable. The maroon nylon web with mineral abrasive effectively cleans surfaces without scratching. It can be used for light duty scrubbing and cleaning of surfaces. This general purpose hand pad measures 6 inches by 9 inches.
Grainger Sq. End Mill Single End Carb 2.00mm
The Grainger 14G058 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive. The set comes organized in a sturdy plastic case for easy storage and portability. Key features of this socket set include the chrome vanadium steel construction for durability and longevity, a knurled design on the tools for grip, and a comprehensive assortment of the most commonly used socket sizes for automotive and machinery repairs and maintenance. This professional-grade socket set provides versatility and convenience for mechanics.
Grainger Thread Relief - 6 Fl Milling
The Grainger Approved Thread Relief 6 Flute Milling Cutter is a high speed steel end mill with a 1/2" shank diameter, 1-1/2" overall length, and 6 flutes. It has a TiN coating for increased tool life and lubricity. The thread relief design provides efficient chip evacuation when milling internal threads or grooves. This is a general purpose tool suitable for slotting, side milling and profiling in most materials. Made in USA.
Grainger Ball End Mill Single End 1.00mm Carbide
The Grainger Approved 1.00mm Carbide Ball End Mill Single End is a milling tool with a 1.00mm diameter ball end made of solid carbide for high speed machining in aluminum, brass, copper, graphite, plastics, and wood. It has a shank diameter of 3mm, overall length of 20mm, and 2 flutes. This single end mill for light milling applications features TiAIN coating for heat and wear resistance. It has a right-hand spiral flute direction.
Grainger End Mill Kyocera MEC 24S2011T 24mm
The Kyocera 170HF9 is a 1/2" diameter, 4 flute, high feed end mill made of micrograin carbide with TiAlN coating. It has a 1-1/2" LOC and can be run at speeds up to 500 SFM. The end mill features variable helix flutes to reduce harmonics and chatter and is designed for high feed milling in steel, stainless steel, and cast iron. It has a tolerance of +/- .0005" and achieves surface finishes to 32 microinch Ra. The end mill is made in Japan.